How to charge a stone with your energy?

Today, there is no clear answer to the question of whether, from a scientific point of view, stones and minerals have memory. And yet, most of us recognize that stones have a certain “life force” and energy field, if we add to this that the main information storage systems in a computer processor use quartz crystals, and also that, unlike most living beings, the stone is a witness to long-term events stretching over centuries and millennia, then the conversation takes on completely different moods and colors. After purchasing a Guasha tool – be it a scraper, roller or crystal – we recommend cleaning the stone. Let’s look at simple methods for cleaning and charging stones and minerals at home.

Cleaning energy scrapers
and Guasha rollers using salt

• Take a container large enough to accommodate the stone.
• Fill it with sea salt.
• Wrap the gua sha stone and rollerball tightly with a cloth.
• Immerse the stone deep into the container so that it goes completely. Close the container with a lid. Leave for 3 to 12 hours.
• Upon completion of the procedure, the Guasha Stone must be rinsed under running water (under a warm water tap) for at least 30 seconds and dried.

Cleaning stones
via Palo Santo

• You need to prepare a stand or small saucer.
• Carefully light one side of the Palo Santo from either end. To do this, it is advisable to use matches or a candle.
• Let it flare up for about 5 seconds and extinguish the fire with a gentle movement.
• Place the Palo Santo so that the smoldering edge is exposed.
• Attention! Be careful with fire and do not leave smoldering sticks unattended.
• Take the Stone in one hand and Palo Santo in the other.
• Move in a circular motion along the edges of the crystal, immerse it in the smoke. Make each movement smoothly and consciously, with the inner intention of cleaning the stone. Usually the procedure takes about 2-5 minutes. Trust the inner feeling of complete cleansing and complete the procedure.
• Upon completion, you can rinse the stone under running water (under a warm water tap) for at least 30 seconds and dry it dry.

The easiest and fastest way
stone and mineral cleaning

In cases where you do not have salt, palo santo or sage to fumigate gua sha, but need to clean the stone at home, we recommend the easiest way to cleanse the energy of the stone and mineral is to rinse it for an average of 60 seconds in cool running or spring water.
At home, before you start using minerals and gua sha stones, turn on cool water from the tap and immerse the stone under its flow. Rinse thoroughly with a clear internal intention to cleanse the energy of the stone. When washing the stone, imagine how with every movement the memory is washed away, the stone is cleansed and acquires a lighter and brighter state. If you do it correctly, these sensations will be intuitive and sufficient to understand that the procedure is completed and the cleaning is completed.

Let’s look at the most popular types of Guasha stones, what are their differences and features. Buy Guasha Roller for massage. Delivery and Pickup

Instructions and techniques for Guasha massage with a scraper with lines. Benefits and contraindications. How to choose the shape of a scraper and what to pay attention to when doing gua sha massage. Online store Guasha.ru

How to choose a stone and mineral, find “your stone” and enhance its positive effect on the body and internal state. Which stone suits me best? Delivery and Pickup

People have long noticed that precious and semi-precious stones have a certain effect on their owner. If the stone is chosen correctly. Then its action will have a positive direction: attract good luck, bring peace, peace and happiness to the family, promote career growth and financial well-being. Incorrectly chosen minerals, at best, will be completely useless, but can also cause harm to their owner. But even if the stone is chosen correctly, over time it may lose its unique abilities.

The need to clean stones

This is due to the fact that during the operation of a talisman, amulet, talisman made of crystal, part of the negative energy does not disappear completely, but remains in it. As a result of prolonged use, a large amount of negativity accumulates inside the mineral. This can lead to the talisman losing its protective functions, the owner’s mood deteriorates, his health deteriorates, fatigue, drowsiness and other problems appear. But bad energy can accumulate not only during long-term use. A conflict situation, quarrel, scandal in which you become a participant leads to a surge of negative vibrations that the crystal can “remember” in its energy structure. Decorating with such a negative crystal may not harm you. In most cases, it simply stops being liked. You take it out of the box less and less, and then you stop wearing it completely. If a lot of negative information accumulates, the stone may become cloudy, lose transparency, and cracks and other defects may appear on it. Those stones that have recently appeared in your collection also need to be subjected to a mandatory cleaning procedure, and it doesn’t matter how:

• inherited from my beloved grandmother;
• was purchased from an online store or jewelry boutique;
• given by a loved one;
• was accidentally found on the street, on the beach, and so on.

Before the product reaches you, it has passed through the hands of many people. The crystal structure has absorbed information that is foreign to you, not always of a positive nature. Only found unprocessed stones are absolutely free from energy, completely pure.

Gemstones are the most susceptible to energy pollution. Among them, the most dangerous, in case of untimely or incorrectly performed cleaning, is onyx. But citrine is easy enough to take care of regularly. If the mineral was inherited from deceased relatives, or it is intended to be used to treat diseases, then it must be subjected to a complete purification procedure.

Basic cleaning methods

There are several different techniques that help remove dirt, negative energy, and other people’s information from a mineral. For each specific stone, you need to select a method that will not harm the crystal, will not disrupt its structure, will not cause clouding, and will not lead to loss of the aesthetic appearance of the jewelry. For example, direct sunlight will cause some stones to lose transparency (rose quartz, amethyst, turquoise), sea salt can cause imperfections on polished edges, and very low temperatures will cause cracks to form.

sunlight

The easiest way to get minerals is through the bright rays of the sun. First, jewelry, amulets, and talismans are carefully washed with warm running water, then rinsed with cold water, and then left in the sun for 2-3 hours. For this procedure, it is better to choose an open space: a garden, front garden, forest clearing, open balcony. Decorations with stones are hung on the branches of trees, bushes or placed directly on the ground, closer to the roots. As a last resort, you can place them on the windowsill; the glass will not become a significant obstacle to the effect of rays on the stones. The main thing is that the weather is good, without rain or clouds.

For more thorough and complete cleaning, the “sunbathing” procedure can be extended for 7-10 days. This is especially true if the stone was inherited from a deceased relative, was in the hands of a bad person, or was used to cure a serious illness.

Sun cleaning is especially beneficial for gems colored in yellow, pink, red, orange tones:

• opal;
• amethyst;
• rose quartz;
• topaz;
• citrine;
• fluorite and so on.

But the sun does not have a beneficial effect on all stones. For some, the sun’s rays are absolutely contraindicated: blue topazes, aquamarines, spodumene.

Water

Another easy way to remove negative energy from stones is to hold the stone in running water. This method is also convenient because, in addition to “erasing” negative information, it charges the crystal with positive energy.

It is best if it is a spring, river, or other open body of water with a constant flow. The gem or decoration is lowered to the bottom for 2-3 hours. You can use blessed water, or collect water from a source and bring it home. As a last resort, put your jewelry in some container or just hold it in your hands and place it under the running tap.

After the procedure, the stones are not wiped off, but left to dry on their own in the open air or, to enhance the effect, by placing a burning candle nearby.

But not all minerals benefit from water treatments. You should not expose it to water: selenite, fluorite, malachite, mother-of-pearl and some other minerals, which can not only fade, but even completely dissolve. And one more precaution: you should not put stones in the water after they have been in the sun for a long time.

Sea salt

Among the positive aspects of cleaning amulets, pendants, and key rings with sea salt, it is necessary to note the fact that in this case the stones are cleansed both from ordinary household contaminants and from negative energy. Sea salt contains a large number of active minerals that will absorb negative information and cleanse the energy structure of gems.

There are two methods of cleaning with salt.

First, you need to prepare a saline solution in a glass or ceramic cup. To dissolve the salt faster, you can use warm water. After waiting for the solution to cool, immerse the products in it and leave for a while, preferably overnight. In the morning, the jewelry is removed, washed under running water to remove any remaining solution from the surface, and allowed to dry in the open air.

• Dry
• for a male stone in a clockwise direction, which leads to the activation of Yang energy;
• for women – counterclockwise, Yin energy.

In this case, any deep dish will do, even one made of metal or plastic. The amulet must be placed on the bottom and completely covered with salt. The duration of this procedure can also be 10-12 hours. Some stones, especially those with a high-quality polish, should not be exposed to sea salt. To clean them, you can use an alternative, non-contact method. Take a dish or deep, spacious bowl and pour salt into it to a thickness of 1 cm or more. Place the jewelry or stone that needs to be cleaned in a small glass bowl and place it on a layer of salt overnight. Even in this case, the crystal will be subject to the beneficial, cleansing effects of salt.

It is not advisable to use these methods for crystals such as amber, lapis lazuli, pyrite, onyx, turquoise, fluorite and some others. If you still want to carry out a salt cleansing procedure for them, then use the non-contact method.

Fire

Astrologers are sure that fire cleansing is necessary for all jewelry with stones that have been inherited from you. This procedure must be performed during the period when the Sun is in the constellation Aries. To perform this action you will need a lit candle. They take it in the right hand, place the decoration on the table and perform circular actions over it with a candle:

To enhance the effect, when performing the procedure, they say a prayer, for example, the Our Father, or a special cleansing phrase: “Let everything that harms me burn in fire.” After cleaning is completed, the stones are left in the open air for some time. It is advisable that the rays of the sun fall on them.

Moonlight

In order for the procedure to be effective, several points must coincide:

• the waning Moon, which will take with it negative energy;
• good weather, the sky should be clear and cloudless;
• a place that will be exposed to moonlight for several hours, the longer the better.

It is best to leave the decoration outside, but you can also put it on the windowsill. In some, especially “difficult” cases, when the stone has been under negative influence for a long time, the cleaning session can be carried out for 2-3 nights in a row. For stones that are “not afraid” of water, salt, you can combine cleaning with saline solution and exposure to the Moon.

Herbs and flowers

In this case, you will need fresh (dried) herbs, leaves, flowers, petals. You can collect and dry them yourself or buy them at a herbal pharmacy. Place the prepared herbs in a container, place a stone and decoration, completely covering the top. To enhance the effect, place the container with flowers and herbs under the moonlight.

Fumigation

This procedure is a bit like an aromatherapy session. You will need a mixture of medicinal plants, for example, juniper, cedar, sage, but you can use one of the above, or some other. Place some herbs in a fireproof container and light it. Plants should not burn or smoke strongly, it is enough that they smolder slightly, emitting small streams of smoke, through which you need to pass the stone, amulet, talisman several times. At the end of the cleansing session, to calm the energy of the crystal, add a few lavender petals to the herbal mixture.

Druze

You can use other minerals to cleanse stones of negativity. Typically, druses are used for this – amethyst and crystal crystals fused together, which are transformers and emitters of energy. They cleanse not only stones, but also the aura of people and the surrounding space. Magicians even call them crystal (amethyst) brushes.

In order to remove negative energy from jewelry, simply hold it next to the druzes for some time, for example, overnight.

Lands

If it is not possible to take the decoration out to your dacha or garden plot, then you can use a flower pot with a houseplant. The mineral or decoration should be placed on the surface of the earth and sprinkled with a thin layer. After 15 minutes, remove the product and carefully rinse it from any remaining soil and dust under warm running water and leave it to dry in the open air. Before performing the procedure, make sure that the stone is not damaged, there are no cracks or chips into which the smallest particles of soil could penetrate.

Sound

This is a rather complicated method. First of all, you will have to acquire crystal or Tibetan singing bowls, resonators, which will become sources of sound waves that can bring the vibration of stones to its natural state. You can also use other musical instruments that can produce clear, soothing sounds: tuning forks, bells, Tibetan drums, shamanic tambourines. Sound has an effect not only on crystals, but also on people, helping to cleanse the aura.

Sometimes it is not even necessary to carry out any special procedure in order to return positive energy to the stone. Being in a good mood, on an emotional high, without strangers:

• take your stones and jewelry in your hands;
• give your thoughts a positive attitude;
• direct all your positive energy to the stones;
• wish them to become crystal clear;
• Inhale deeply and deeply and blow on the gems, repeat three times.

Indicators of stone purity

In some cases, a single cleansing procedure is not enough and must be repeated several times. Among the main indicators of the purity of the amulet:

• smooth, silky, as if a newly polished surface of the stone;
• you are pleased to touch the gem, you feel cool and fresh;
• brightness, saturation of the color shade of the mineral;
• the gem seems to glow from within, emitting a radiance;
• taking the stone in your hands, you feel your mood lifting, you begin to feel confident in your abilities, and a feeling of comfort returns to you;
• power and strength emanate from the talisman.

Do not forget that jewelry, amulets, and amulets cannot be given to anyone, even just to take a closer look or try on. If you are afraid that your refusal will offend the person, then try not to give it to them, but simply put it on the table. Let your interlocutor take it from the table, and then, after trying it on, put it back. Then clean again.

Frequency of cleaning

The frequency of cleaning procedures depends on how intensively the jewelry was used and what its energy load is. For example, if you wear it constantly, after a conflict situation, quarrel, or unpleasant conversation, the stone must be cleaned as soon as possible.

If you have a lot of jewelry, you change it often or wear it from time to time, then the regularity of cleaning can be once a month or even less often. In most cases, a close energetic connection is established between the owner and the stone, and the person himself feels the need to carry out a cleansing procedure.

Paying attention to the magical properties of crystals, taking care of their energetic purity, do not forget that in the process of wearing jewelry they become contaminated with simple, ordinary dirt, dust settles on them, microorganisms get on them, and so on. Therefore, they need to be constantly looked after. Make it a rule:

• after wearing, be sure to wipe the stone and the entire product with a soft, clean, dry cloth;
• store your jewelry, keychains, rings, earrings in a closed box;
• do not expose them to mechanical or chemical influence.

Charging stones

Stones cleared of negative energy must be charged, that is, they must accumulate positive energy that comes from the Universe. The most ideal days for performing the procedure are the summer solstice. Sunlight or moonlight is used for charging. Take your “treasures”, take them outside, into the garden, into the forest, spread them out and let the sun warm them with its warmth, transfer its power. Try not to have anyone nearby.

But since the summer solstice is only 3 days a year, you can use moonlight to charge the crystals. To do this, the Moon must be in the full moon phase. Take the stones outside and hold them in such a way that the radiation from the “night light” hits the stones. Another interesting way of lunar recharging: fill a bowl with clean water, go out into the open air with it and “catch” the moon’s rays so that the Moon is reflected in the water. After this, immerse the gem in water and leave it there for a while. Once removed from the water, do not wipe the crystal, let it dry naturally.

A purified, charged mineral cannot be worn immediately. Let him lie down for a while and “rest.” Please note that stones can only be charged after cleaning.