How to wear a ring if it is large?

Depending on the reason, you will be able to determine the best way to shrink the ring so it doesn’t fall off.

What to do if the ring is large: solution in the workshop

The best life hack for what to do if the ring is large is to consult a specialist. When you notice that the ring is large and is not affected by the time of day or your physical condition, the best thing you can do is go to a jewelry workshop. Craftsmen will be able to determine exactly which size is right for you and reduce the jewelry to the desired size. Moreover, the craftsmen in the jewelry workshop will take into account which technique is best suited in a particular situation, and this guarantees the safety of the procedure.

There are several techniques that specialists use in situations where the ring is large.

Large ring and cutting technique

Most often, when a person comes up with the problem that the ring has become large, the craftsmen use the technique of cutting the ring. It involves the use of specialized tools. For example, lasers or jewelry saws. This helps to remove some of the metal from the ring as carefully as possible, thereby reducing the size of the rim. Cutting is a process that requires special skills and extensive experience of the craftsman, otherwise there is a risk of damaging the ring or precious insert. With skill and experience, the master can reduce the size of the ring with minimal changes in the design of the jewelry. Where to look for expert craftsmen? You can contact the service of the jewelry factory, which is the manufacturer of your jewelry.

Large ring and squeezing technique

As in the previous technique, for compression the craftsmen use a special device, which is known under the working name “compressor ring”. The master places your accessory into the device, after which the jewelry is compressed to the desired size. The device is created on the basis of a special mechanism, and units with a handle are also popular, which help reduce the accessory to a non-standard size. For example, the classic sizes would be 16 and 16,5, but there are cases when a person’s finger size is 16,3 and then for comfortable wearing it is necessary to reduce the jewelry to a specific size. Shrinking is considered a less invasive method that helps shrink jewelry without removing material. If you have a large ring with a complex design or inlaid with expensive gems, the master will suggest this particular technique.

Large ring and adding insert

If the ring is large, craftsmen may suggest adding additional inlay. This technique is often recommended if the ring is impossible or impractical to reduce through other methods. Using this technique, the craftsman adds a metal insert that narrows the inner diameter of the ring. Thanks to this, jewelers can preserve the original appearance and original design of the accessory. But the use of this technique has its limitations. For example, if there is engraving, then this life hack will not work if the ring is large. The size will decrease, but the inscription will not be the same. Wide rings are also not suitable for this technique.

Large ring and shortening the bezel

This method is used extremely rarely, since it has certain requirements and limitations. The technique of shortening the bezel is suitable only for situations where the bezel of the jewelry is thin. In this case, the jeweler can make it shorter without compromising the structure, design or appearance of the jewelry. First, the craftsman removes a segment of the product, and then connects the cut edges. Since the technique is similar to the first, which does not have such restrictions, in modern workshops jewelers more often choose cutting rather than shortening the bezel.

What to do if the ring is large at home

If you notice that the decoration is large and decide to fix it at home, then you need to understand that this is a temporary solution. The life hacks industry is developing and now there is an answer to any question, but often they have a short-term effect. What to do if the ring is large at home?

Use available tools:

1. Try silicone pads – this is one of the simple and convenient ways to reduce the size of the ring. First you put on the pad and then you put on the accessory. However, the jewelry should be wider than the overlay for a natural look.
2. Use clear polish or topcoat. If the jewelry is not inlaid, apply a top coat and dry in a lamp. Thanks to this method, you can control the thickness of the layer, and therefore the level of reduction of the product. If there is no topcoat, use clear varnish. More of it will be needed.
3. A flesh-colored patch can also help if used correctly. It is ideal for medium length or tapered headbands. This way you can control the size and degree of reduction. The mechanism is simple: we trace the jewelry, cut out the required area of ​​the patch, stick it on the finger (the number of layers depends on how large the jewelry is), put on the jewelry and enjoy the result.

Life hack to prevent the ring from falling off

The most proven life hack to prevent the ring from falling off is to use a combination. Lately we have seen a trend where several pieces of jewelry are worn at the same time. You can use this trend to wear a large ring in any situation. How to implement a life hack correctly? First, put on the ring that is large for you, then choose jewelry with the optimal (or even smaller) size. Thanks to the second accessory, the first one will definitely not fall off.

Ideal ring size: choose according to recommendations

In order not to think about what to do if the ring is large, it is better to immediately prepare for this issue. One of the most common reasons why a ring turns out to be large is insufficient preparation when choosing jewelry. There is a difference between choosing a piece of jewelry or looking for a gift for a loved one. Especially if you are buying engagement rings.

To prevent the ring from being too large, consider the following recommendations when choosing:

• we choose jewelry after the second half of the day, since in the first half there is a risk of swelling;
• the night before, you should avoid drinking too much and eating salty foods, which cause swelling;
• for girls it is important to take into account the menstrual cycle, since sometimes swelling occurs during menstruation;
• The ideal time to choose jewelry is the optimal physical temperature – 23 degrees Celsius (due to cold, our cells can narrow, and due to heat, blood vessels dilate and blood flow increases).

Finally, it is also important to point out that the ring can become large if chosen during times of stress. Cortisol (the stress hormone) is released, which has effects on people ranging from swelling to weight gain.

When purchasing jewelry, each of us strives to choose the best option for ourselves. Material, precious inserts, overall design and cost are all things that we take into account when choosing a product. But the most important point in choosing is determining the required size of the decoration. And if jewelry such as chains and bracelets can be selected intuitively by size, then with rings everything is much more complicated.

In order for the jewelry to sit comfortably on your finger, it is better to try on the accessory in the first half of the day. Before purchasing a jewelry ring, you should not drink a lot of liquids or alcoholic beverages. It is important to remember that in hot weather your fingers may swell a little more than usual, and in such a situation it is better to postpone the fitting.

But if it happens that due to certain circumstances the gold ring has become large, do not despair ahead of time. In most cases, everything can be fixed.

Reducing the size of a gold ring in a jewelry workshop

The most reliable and effective option for reducing the size of a product is to contact a jeweler. The master will select the appropriate way to make the ring smaller depending on the design of the product. In total, there are three possible methods for reducing jewelry rings, and models made of gold and silver are best suited to such procedures.

1. Tenderloin – the most popular and easiest way. The craftsman carefully cuts out a piece of shank, then solders the edges and polishes the rim. This way you can easily reduce the product by 1-2 sizes, without leaving any marks on the jewelry.
2. Compression. The method is ideal for smooth rings and jewelry with simple designs. First, the product is heated, then, when the metal becomes more elastic, the ring is cooled and placed under a press, where it is adjusted to the required size. The final stage of the procedure is cleaning and polishing the jewelry.
3. Insert. This method is used least often, but in some cases it is the only possible one. The jeweler inserts a special strip from the inside of the ring, made of the same metal as the jewelry itself. Thus, the diameter of the product decreases, while from the outside it is completely unnoticeable. The presented method is the most expensive of all, since it uses precious metal, however, the result obtained is worth it.

Only a professional craftsman can tell you which method is best to use when reducing the size. Usually this procedure takes from several hours to a couple of days, it all depends on the workload of the jeweler.

When contacting a specialist, be sure to discuss with them the possible risks and warranty issues during the procedure. If the cutting method is used when reducing, do not hesitate to request the return of the removed portion of the jewelry.

In what cases is it impossible to reduce the ring size?

Unfortunately, not all rings can be reduced in size. Some models are physically impossible to fix, as they may become deformed or completely lose their original appearance.

Which rings cannot be reduced:

• openwork models and decorations of complex designs. When changing the size of such a product, it is very difficult to restore its previous appearance, so it is better not to take risks.
• copies with engraving. When the size of such a product is reduced, the inscription will become deformed, which will not look very attractive.
• models with diamond serrations. During the shank reduction procedure, the original diamond cut will be noticeably damaged.
• products with stones, especially if the model is decorated with precious stones. Due to changes in the size of the shank, the stone may simply fall out of the setting.
• It is also not advisable to reduce rings with a thick shank, and not every master will undertake such work. In this case, it is very difficult to guarantee a perfect result.

It is worth noting that you can reduce the ring by a maximum of three sizes; this must be taken into account when choosing jewelry. You also need to weigh the pros and cons before taking the jewelry to the workshop. Returning the jewelry to its original size will not be easy, and in some cases, impossible.

If the ring falls off – what can you do at home?

If your favorite ring has become too big, but you don’t want to take it to the workshop for certain reasons, you can use the following tips.

• The simplest option would be to wear the jewelry under another ring of a suitable size, which will hold the jewelry and prevent it from falling off the finger. It is better to select jewelry from the same metal and in a similar style.
• you can also use a special silicone pad, which is attached to the inside of the jewelry and does not allow the ring to slide on the finger. This accessory can be purchased online or in a jewelry store.
• You can reduce the ring using available methods. For example, to cover the inside of a tire clear nail polish. Usually 2-3 layers should be enough for the jewelry to fit well on the finger.
• those who do not like the above options can try wear a ring on a gold chain, it looks attractive and stylish.

Don’t be upset right away if the ring has become large; we are sure that the methods listed above will definitely return you the opportunity to admire your favorite jewelry again.